TOA Electronics F-1000BTWP Manuel d'utilisateur

OPERATING INSTRUCTIONSSPEAKER SYSTEMSF-1000BF-1000BTF-1000BTWPF-1000WF-1000WTF-1000WTWPThank you for purchasing TOA's Speaker System. Please care

108.4. Ceiling MountingUse the supplied joint bracket and speaker bracket.NoteSpeaker coverage angles can only be adjusted in the vertical direction (

11Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket andloosely securing the fixing bolt for tempo

128.5. Speaker Stand MountingThe speaker can be mounted on the optional ST-16A Speaker Stand using the supplied joint bracket andspeaker bracket.[Inst

138.6. Pole Mounting (F-1000BTWP and F-1000WTWP only)To mount the speaker on a pole with diameter of 10 – 34 cm, use thesupplied wall bracket, joint b

14Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speakerangle, then tighten the screws. NoteMat

15Step 2. Wipe clean the mesh grill and speaker cabinet with a soft cloth dampened in a detergent. NoteDo not use thinner or other volatile liquids to

1610. SPECIFICATIONS10.1. F-1000B and F-1000WF-1000B F-1000WBass-reflex type30 W (continuous pink noise)90 W (continuous program)8 87 dB (1 W, 1 m) a

17F-1000BT F-1000WTBass-reflex type15 W670  (15 W), 2 k (5 W), 3.3 k (3 W), 10 k (1 W)87 dB (1 W, 1 m) at installation in a semianechoic field85 –

F-1000BTWP F-1000WTWPBass-reflex type15 W670  (15 W), 2 k (5 W), 3.3 k (3 W), 10 k (1 W)87 dB (1 W, 1 m) at installation in a semianechoic field85

2TABLE OF CONTENTS1. SAFETY PRECAUTIONS ... 32. GENERAL DESCRIPTION ...

3When Installing the Unit• Install the unit only in a location that canstructurally support the weight of the unit and themounting bracket. Doing othe

42. GENERAL DESCRIPTIONTOA's F-1000 Series Speakers are compact two-way speaker systems designed for high efficiency, widerange, and high power i

55. IMPEDANCE CHANGE (F-1000BT, F-1000BTWP, F-1000WT, and F-1000WTWP only)To change the impedance, use a standard screwdriver to rotate the rotary swi

67. NOTES ON OUTDOOR INSTALLATION (F-1000BTWP and F-1000WTWP only)• Be sure to mount the speaker in a vertical (portrait-style) orientation.• Adjust t

78. INSTALLATION8.1. Using the Supplied BracketsThe speaker system is supplied with the following brackets. Use these brackets properly depending on t

88.3. Wall MountingUse the supplied wall bracket, joint bracket, and speaker bracket to permit adjustment of the horizontal andvertical* speaker cover

9Step 2. Attach the joint bracket to the wall bracket using the supplied screws, adjust the horizontal speakerangle, then tighten the screws. Note: Ma