NETWORK COLOR CAMERAN-CC2360INSTRUCTION MANUAL1. SAFETY PRECAUTIONS ... 22. LIST OF INCLUDEDCOMPONENTS AND PARTS ... 3
106. Adjust the iris level•When using the DC input type lensAdjust the iris level on the Camera menu screen's "IRIS" item.6-1 Check to
11F.ADJANTI-FLICKERNCOFF ONMode switchFocus adjustment switchFlicker-reduction switchNot used.Mode switch (factory default)[ N-CC2360 ]F. AD JANTI-FLI
12No.123456IN 1IN 2COUT 1OUT 2CContact input 1Contact input 2COMContact output 1Contact output 2COMTerminal NameContact nameDay/ NightSelect Contact i
1311. SETTING INITIALIZATIONNetwork settings can be reset to their factory defaults. 1. Either press the Reset key or switch on the power again while
1412. TROUBLESHOOTINGRemedySupply power independently to theCamera.Confirm that the cable type (category,null modem or straight) is appropriatefor the
1524 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af)13 W (at 24 V AC), (8 W: PoE, 350mA: 24 V DC)Screwless connector(Solid cable: ø 0.4– ø 1.2 mm (AWG
16Note: The design and specification are subject to change without notice for improvement.MPEG-4: max. 4 Mbps5 (MPEG-4: 4, JPEG: 1)In streaming mode:
1724 V AC, 50/60 Hz or 24 V DC or PoE (IEEE802.3af)13 W (at 24 V AC), (8 W: PoE, 350mA: 24 V DC)Screwless connector(Solid cable: ø 0.4– ø 1.2 mm (AWG
18Note: The design and specification are subject to change without notice for improvement.MPEG-4: max. 4 Mbps5 (MPEG-4: 4, JPEG: 1)In streaming mode:
21. SAFETY PRECAUTIONS• Before installation or use, be sure to carefully read all the instructions in this section for correct and safeoperation.• Be
133-12-993-90URL: http://www.toa.jp/
3Indicates a potentially hazardous situation which, if mishandled, couldresult in moderate or minor personal injury, and/or property damage.CAUTIONWhe
43. GENERAL DESCRIPTION4. HANDLING PRECAUTIONS•Do not direct the camera lens to the sun or strong lighting or light reflection. Exposure to direct sun
5(1) Power Input Terminal [24 V AC, 24 V DC]Connect this terminal to the 24 V AC or 24 V DCpower supply.Note Do not connect 24 V AC or 24 V DC powerwh
6Ceiling surfaceLock leverCamera mountingbracket (optional)PedestalCamera mountCamera mountPedestalCamera mounting bracket (optional)Lock leverCamera
76mm or lessLens•To avoid damaging the internal sections of the camera's lens mount, be surethat the lens flange is 6 mm or less thick as illustr
87.1. Connection ExamplePoE compatible HUBSoftware Decorder10BASE-T/100BASE-TX10BASE-T/100BASE-TX24V2 124V12C12C10/100M PoEAUDIOOUTMONITOROUTOUTINC
98. ADJUSTMENT1. The RDY indicator lights when the power is supplied to the network camera.2. Connect the monitor output terminal to the monitor so th
Commentaires sur ces manuels