TOA Electronics EX-16 Manuel d'utilisateur télécharger pdf (Page 26)

Jumper for Speaker Station Selection

Jumper for BGM On/Off

For BGM on/off operation remotely, the

control line can be extended the same way

as for station wiring.

How to Connect the Jumper Wire

1. Use a 0.6mm diameter plated wire as jumper.

2. Solder on the soldered end.

3. Use a soldering iron with less than 30W power

and with minimum leakage.

Be careful not to touch other parts.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Pas de commentaire

TOA Electronics EX-16 Manuel d'utilisateur Page 26